Results 1 to 2 of 2
  1. #1
    Senior Member
    Join Date
    Feb 2012
    south central ont can
    Thanked 0 Times in 0 Posts

    190 allis xt seris 3

    total rebuilt 2008 less than 1500 hours oil consumption constantly gets worse I suspect it going through turbo anyone know how to check this has gotten to 3 quarts a hour get worse more you use it runs great lot of power
    MF 1105 MF 265 MF165 . MF165 high arch with factory mid mount cultivators AC 190xt AC g CASE d IH cub DAVID BROWN 1200 FORD 4500 back hoe

  2. #2
    Moderator wizzard's Avatar
    Join Date
    Feb 2012
    Thanked 6 Times in 6 Posts
    im not shure how they plumb the turbo's on those but if its got a tube from the cold side of the turbo to the intake manifold, remove that tube and have a look see. if the tube is just drenched/caked with oil its comeing from the turbo. check the exhaust side to if ya got a long strait up exhaust pipe. while ya got the tubes off you can check the turbo's impeler shaft just by giving it a good wiggle. it should have a little wiggle room but not enuff that the fins touch the housing
    Last edited by wizzard; Yesterday at 06:26 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts